Skip to main content
The Real Threat

Stop erosion
before it starts.

T-PRO® chemically bonds with native soil to build a stabilized surface that resists the forces that strip land bare — without rip-rap, geotextiles, or constant re-grading:

  • 💨
    Wind Erosion
    Unprotected soil surfaces shed tons of material in a single weather event — destabilizing berms, slopes, and site boundaries.
  • 🌊
    Runoff & Washout
    Storm water cuts channels through unprotected grades, undercutting embankments and triggering cascading slope failure.
  • ⛰️
    Slope Instability
    Saturated, unbound soil loses cohesion rapidly — conventional erosion fabrics and seed mixes fail under real load and real weather.
T-PRO® Solution
Bind it. Protect it.
Leave it.
🛡️
Surface Crust Hardening
T-PRO® penetrates and polymerizes native soil into a durable, wind- and water-resistant crust — no import, no geotextile, no repeat application.
💧
Hydrophobic Binding
The treated layer repels water rather than absorbing it — runoff sheets off the surface instead of cutting into the slope.
📐
Slope & Berm Stabilization
Applied to embankments, berms, and cut slopes to lock surface material in place — even in coastal and high-wind environments.
♻️
Environmentally Benign
No chlorides, no synthetic fabrics, no chemical runoff. T-PRO® breaks down without harm — meeting EPA and site environmental requirements.

Erosion Control — In the Field

Projects Where T-PRO® Held the Ground

Start Your Project →
Saudi Rail Organization train on protected track — sand berm stabilization
T-PRO® application to sand containment berms, Abqaiq, Saudi Arabia
Government / Infrastructure

Railway Sand Drift Abatement

📍 Abqaiq, Saudi Arabia — Arabian Desert
200 km
Berms specified by SRO
100+ mph
Wind resistance tested
12:1
Water-to-polymer ratio

T-PRO® replaced crude-oil stabilization along high-traffic Saudi Rail Organization lines, locking sand berms against 100+ mph desert winds. Performance was so decisive that SRO issued an exclusive specification covering 200 km of protective berms — cutting clearing frequency from monthly to annual reapplication.

Erosion Control Wind Stabilization Rail Infrastructure
Concept Rendering Coming Soon

Carbon Zero Custom-Printed Sea Walls

📍 Coastal Infrastructure — Coming Soon
0
Net Carbon Footprint
100%
Recycled Feed Material
3D
Printed On-Site
What We’re Building
  • Custom 3D-printed sea wall sections designed site-specifically — interlocking profiles engineered to dissipate wave energy rather than reflect it
  • Feed material sourced entirely from post-consumer and post-industrial recycled polymers, achieving a net-zero carbon construction footprint
  • T-PRO® polymer coating applied to finished sections for long-term saltwater and UV resistance
  • First installations targeting Texas Gulf Coast and coastal restoration projects in the Southwest
🌊
In Development — Contact Us to Learn More If you’re planning coastal infrastructure and want to be among the first to spec carbon-zero printed sea walls, get in touch.